|
The SHD640
Hydraulic
Block Making has the same production capabilities as the other
machine, but produces a stronger block and cost thousands of
dollars less than machines with similar production capabilities.
The block
manufacturer can also realize substantial savings by using less
cement. A ratio from 8:1 to 11:1 sand/cement can be achieved.
This machine is designed for the manufacturer with limited
space, limited budget and the desire to achieve good quality,
high volume of blocks, with the minimum cash outlay.
There are
many machines on the market that are much larger and triple the
price, with a daily production that is similar or less than this
machine.
You will
need a good mixer of over 400 liters to guarantee maximum
production. A work force of 5 employees would keep this factory
running at full capacity.
Production capabilities in 9 hour day:
Model SHD640
100 x 200 x 400mm (4") 06 blocks per cycle or 6000 per day 150 x
200 x 400mm (6") 04 blocks per cycle or 4000 per day
200 x 200 x 400mm (8") 03 blocks per cycle or 3000 per day
Production capabilities in 9 hour day:
Model SHD754
100 x 200 x 400mm (4") 07 blocks per cycle or 7000 per day 150 x
200 x 400mm (6") 05 blocks per cycle or 5000 per day
200 x 200 x 400mm (8") 04 blocks per cycle or 4000 per day
Smaller
Machine
Model SHD400
Production capabilities in 9 hour day:
400 x 200 x 090mm (3.5") blocks, 5 per cycle or 5000 - day
400 x 200
x 100mm (4") blocks, 4 per cycle or 4000 per day
400 x 200 x 150mm (6") blocks, 3 per cycle or 3000 per day
400 x 200 x 200mm (8") blocks, 2 per cycle or 2000 per day
Additional Specs:
Comes equipped with a 5hp, 7 GPM hydraulic
unit. Three phase 220/440 volts is recommended. Can be modified
to your specifications. Up to 15 hp 16 GPM Hydraulic unit. Size
of hydraulic cylinders can also be increased.
Applied
pressure/Force to block
during operation: 3.200 kg
|
